Plumbing Newbie? Tips And Tricks That You Should Know
Good plumbing maintenance is relatively easy, but failing to keep up with it can mean costly repairs. Here are some good ways you can take care of your plumbing, either yourself or with the help of a licensed professional. Take care of your house now and it will beneift you in the future.
To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.
Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.
To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.
Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.
Put the strainer on top of drains to catch any food that would go down and cause a clog. Clean your kitchen strainer often, particularly if you can see debris accumulating. Keep the bathroom drains cleaned out too.
Before check here embarking on a plumbing project, make sure that you're aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you'll be able to stop the water flow.
If you live in a home using well water and your bathtubs have stains pink and orange in color, this is likely a result of iron levels in the well water. To get rid of this problem, you can either use a commercial product to soften the water, or have a contractor come to your home and do the work for you.
One of the ways that you can improve the functionality of your shower head is to clean the mineral deposits from the surface. Unscrew your shower head and soak it in vinegar overnight. In the morning, brush off the deposits with a toothbrush to help the flow of water for your showers.
In the plumbing world, you have many techniques to make your approach better and more efficient. Plumbing is a skill used in every home, but each house will have it's own system to deal with. Hopefully, the advice in this article can contribute to your system, and help fulfill whatever plumbing needs present themselves in your home.
How to get a decent plumber without going round the U-bend
Finding the valves
You can also search for reputable tradesmen in England and Wales via the Association of Plumbing and Heating Contractors (APHC) and in Scotland and Northern Ireland through SNIPEF.
John Thompson, the chief executive of the APHC, says there really is no need to stick with the first available plumber that you stumble on.
"If you feel pressurised into accepting work without a full explanation, have the confidence to question or get a second opinion. Also check if the tradesmen has the right credentials to work on your appliances," he says.
Mind you, if water is pouring, or even just dripping from the ceiling, you will need to try and isolate the problems to minimise damage before the plumber arrives.
For major leaks, turn off the water supply at the main stop tap, usually in the kitchen. You might need to resort to turning off the water company tap at the boundary of the property. Older ones may also turn off your neighbour's supply.
Smaller internal leaks can be stopped using local isolation valves - usually next to the appliance or tap concerned. These may be less familiar to older consumers as they take the form of levers or are just turned with a screwdriver.
On a combi boiler the isolation valve will be located underneath the boiler.
Ian Ruddick
Image caption,
Turning the thermostat up too suddenly can push your boiler over the edge, says Ian Puddick
Lagging
Ian Puddick is the founder of the London Boiler Company. His team is well used to being called out to replace worn out boilers which give up the ghost when they are pushed too hard.
"What happens is that all of a sudden people turn the thermostat up, but this pushes your boiler over the edge," he says.
"Also where you have tanks in the loft, check the little one to see that it's full of water. These can work with little in them for years, but when you turn the temperature up it drives the system a bit harder and then it stops."
Mr Puddick also has a helpful tip for avoiding a big freeze in your loft.
"Once you have checked all your pipes and tanks are lagged, protected and covered, check underneath the water tank. If there's some insulation there just pull it out and leave that area clear so heat can rise and protect the tank."
Emergency repairs are costly. So to avoid being fleeced by an opportunist plumber, it's worth getting your pipes and systems checked and serviced by a reputable engineer before temperatures drop once again.